Detection depth:
1. Maximum detection depth: about 14 meters
2. For a 5cm*5cm object, this instrument can detect at least 3.5 meters.
3. For an object of 30 cm*30 cm, it can detect 5 meters, and if the object of this size has been buried for a long time, it can reach 10 meters.
4. If the area of the object is larger, its detection depth will be deepened.
Specific functions:
It can accurately determine the buried position of objects and can be located.
It can also rely on the frequency adjuster to identify the specific type of metal.
The use of the transmitter
Power This is the power switch button (when the instrument is not in use, the switch should not be turned on)
Please select the metal you want to detect according to the original metal you want to detect Power (receiver power switch)
Gold (gold) Silver (silver) copper (copper) Diam (jade porcelain) attention (can not choose two metals at the same time) otherwise it will cause damage to the instrument, resulting in no warranty.
Precautions
1. Because of the existence of magnetic storms and solar auroras, this instrument must be debugged for a period of time before normal use. The receiver will continue to receive signals during this time, but the instrument will not respond. This situation is beyond the control of the big crow, which takes some time to adapt.
2. The instrument is more suitable for field operations, and detection in urban areas is prone to interference, especially radio waves, so turn off the mobile phone before using the instrument.
3. We are not responsible for any damage to the instrument caused by man-made damage or replacement of internal parts.
technical parameter:
Search system: microprocessor control and reflection conductivity
Search range: 800 meters
Detection depth: 14 meters
Energy: 12V 1600mAh
Transmission frequency: 5.6--6KHz
Signal frequency: 360--440Hz
Weight: 3.2KG
Detection Type: Gold, Silver, Copper, Gem
Charging method: The instrument has been installed with rechargeable batteries, which can be charged directly by connecting to the charger. The charging time is 10--12 hours. off to open. Select the metal type according to the original on the transmitter to detect.
Boot test
Open the Texan
When the host and the searcher switch, the work indicator on the searcher will flash; when the copper gear is selected on the host, the corresponding copper indicator on the searcher will be on, and when other silver, gold and gem gears on the host are selected in turn, The corresponding indicator light on the searcher will light up.
If the gear selection on the host appears, but the corresponding indicator light on the searcher is not on, the power of the host and searcher may be insufficient and need to be charged.
If the above conditions are normal, the instrument is normal and can be used with confidence.
Use of the transmitter
Power This is the power switch button (when the instrument is not in use, the switch should not be turned on)
Please select the metal you want to detect according to the origin of the metal you want to detect
Gold (gold) Silver (silver) copper (copper) Diam (jade) Note (can not choose two metals at the same time) otherwise it will cause damage to the instrument, resulting in no warranty.
use of the host
Just turn the power switch on. Select the metal type according to the original on the transmitter to detect.
How to operate
Hang the main unit vertically on your waist and keep it parallel to your legs as much as possible. If you operate the search device with your right hand, hang it on your right waist, and if you operate it with your left hand, hang it on your left side. Note: Remove metal objects such as mobile phones and key chains.
No related record found